[Beta] Plug-It

peace · 2018-11-20 08:22:43

LukeM wrote:

peace wrote:
▼LukeM
peace wrote:
LukeM wrote:
peace wrote:
hi lukem got another PC (windows 10 and using IE) now i wanted to open your plugit but the site doesnrt exist anymore? nor th eplugin selector one
When I first started making my website I decided against trying to support IE as it was supposed to be an enjoyable project, and I think attempting to support IE would probably make me go insane
I would have expected it to at least load though... No clue why its saying the website doesn't exist...
Anyway, I'd advise Firefox, or if you really have to use a preinstalled browser, then use Edge
this is what it says( note you have to translate things) Deze pagina is niet bereikbaar
•Controleer of het webadres https://lukesthings.com juist is
•Met Bing zoeken naar deze site
•Vernieuw de pagina

Meer informatie Meer informatie

Er is verbinding gemaakt met de website maar er zijn geen gegevens van de website ontvangen.

Foutcode: INET_E_DATA_NOT_AVAILABLE
If I didn't make myself clear:
My website just doesn't work on IE, and I don't care enough about IE to fix it
IE was replaced by Edge a few years ago, so if you're using Windows 10, theres really no reason to be using IE anymore (either install another browser like Firefox, or just use the preinstalled Edge)
yeah but you said it should atleast load so i showed you what it says if i try to load it
Ah ok, by "I would have expected it to at least load though" I didn't mean to imply that its working for me (I get the same error when I load it in IE)

ah ok was just wondering why this error occured and why exactly THIS error but question answered!

KirbyKareem · 2018-11-20 14:29:03

I don't know how to sign in, where should I put /permission set [your name] 4?

I know it would be /permission set kirbykareem 4, no more joeks pls

LukeM · 2018-11-20 15:47:56

KirbyKareem wrote:

I don't know how to sign in, where should I put /permission set [your name] 4?
I know it would be /permission set kirbykareem 4, no more joeks pls

First you need to make sure you have the Core plugin enabled through https://lukesthings.com/plugIt/selector/ (click on Core then press Enable)
You then sign in to the bot through https://lukesthings.com/plugIt/, then once the bot has connected, type "permission set kirbykareem 4" into the command box and press send

KirbyKareem · 2018-11-20 16:27:15

LukeM wrote:

First you need to make sure you have the Core plugin enabled through https://lukesthings.com/plugIt/selector/ (click on Core then press Enable)
You then sign in to the bot through https://lukesthings.com/plugIt/, then once the bot has connected, type "permission set kirbykareem 4" into the command box and press send

I've done the core plugin, but I don't know how to sign in. I see log in, but when I put an email and password it says wrong password. How do I connect the bot?

LukeM · 2018-11-20 16:55:10

KirbyKareem wrote:

LukeM wrote:
First you need to make sure you have the Core plugin enabled through https://lukesthings.com/plugIt/selector/ (click on Core then press Enable)
You then sign in to the bot through https://lukesthings.com/plugIt/, then once the bot has connected, type "permission set kirbykareem 4" into the command box and press send
I've done the core plugin, but I don't know how to sign in. I see log in, but when I put an email and password it says wrong password. How do I connect the bot?

That means you entered the wrong password for the EE account registered to that email address

Do you sign in using the main site or kongregate / facebook / etc?

KirbyKareem · 2018-11-20 16:57:10

▼Quotes

Ohhh, I thought you could use any email and password lol. Ima try it out now xD if theres an edit I failed, if none YEE IT WORKED. checking now

Edit: Hmm, do you need to be in a world to do permission set?

I tried putting in a real world ID, and this happened.

▼Well, atleast I have the code saying something!

I think I need to be in the world when I click Connect, but I'm not the creator. Is this right Lukem???

LukeM · 2018-11-20 22:25:04

KirbyKareem wrote:

Edit: Hmm, do you need to be in a world to do permission set?
I tried putting in a real world ID, and this happened.
Authenticated
Loaded config
Loaded player object
Successfully logged in
Error: GeneralError: Could not establish a socket connection to any of the given endpoints for the room
Error: GeneralError: Could not establish a socket connection to any of the given endpoints for the room
I think I need to be in the world when I click Connect, but I'm not the creator. Is this right Lukem???

Thats an internal PlayerIO error... No clue what would be causing that...

What browser are you using? It definitely works on Firefox, and I'd assume it should work on Chrome too, I guess try one of those if you're not already

LukeM · 2019-03-01 23:43:17

My web server seems to have been down for the last week and a bit, not sure why... (turning it off and on again didn't fix it :O)

I'm currently at university and I host it from home, so can't fix it right now, but should be able to in just over a week.

Sorry for any inconvenience

peace · 2019-03-02 11:31:50

Lukem just a minor question whenevr i want to copied somethign fomr someone elses world and im in th elobby and connect the bot an duse !selection X, Y, X, Y, to select a selction and then save it wiht !selection save (name_of_selection) and load it in my world it just refuses to load while when i chack !selection saves its there

LukeM · 2019-03-02 12:55:07

peace wrote:

whenevr i [...] use !selection X, Y, X, Y, to select a selction and then save it wiht !selection save (name_of_selection) and load it in my world it just refuses to load while when i chack !selection saves its there

Does it give an error message or anything?

peace · 2019-03-02 20:10:38

i dotn know exaclty i happend a few times when i wanted to do this i just doesnt load th ebcloks or only 1 single bg orso but i cant tell that i remebe it sayid an error i thought idid everythin fine

EDIT: it could be that i th ebot dont have edit and as im not in the world becuase of tht twice in a world feature so i directly copy a selection or the whole world with !selection (moslty when copying a world)

LukeM · 2019-03-12 16:21:10

Should be up and running again now, not exactly sure what went wrong but I updated the version of Linux I was running and turned it off and on a few times and it started working again

Slabdrill · 2019-05-04 04:06:21

hey luke it broke i wanna use bot

Authenticated
Loaded config
Loaded player object
Detected linked account
Joined authentication room
Received authentication key
Error: UnknownConnection: The connection requested is not known by the server

Gosha · 2019-05-04 08:17:38

Slabdrill wrote:

hey luke it broke i wanna use bot
Authenticated
Loaded config
Loaded player object
Detected linked account
Joined authentication room
Received authentication key
Error: UnknownConnection: The connection requested is not known by the server

linked accounts are disabled for the time being

LukeM · 2019-05-04 12:09:11

Ah sorry, we made some small changes to linked accounts and I forgot to also make them to PlugIt, I'll do that shortly

Edit: Should be fixed now

peace · 2019-06-29 10:16:18

uhm i dont knwow what wrong because ti doesnt seem to be on my side but it takes too logn to load plugit so it gives the error saying **** takes too long (and ggives suggestion about if its your internet which is slow ect) but reloading also doesnt wokr the problem is when i close it and reopent ehe forums the forums are opnened almost instantly

LukeM · 2019-06-29 10:37:41

peace wrote:

uhm i dont knwow what wrong because ti doesnt seem to be on my side but it takes too logn to load plugit so it gives the error saying **** takes too long (and ggives suggestion about if its your internet which is slow ect) but reloading also doesnt wokr the problem is when i close it and reopent ehe forums the forums are opnened almost instantly

Looks like the website is down at the moment, not sure why and I can't look into it right now, but I should be able to later today / tomorrow

peace

LukeM · 2019-06-30 21:16:33

Should be fixed now, not sure what happened but rebooting it fixed it

Trytu · 2019-07-06 16:47:22

!help selection map is not sufficient for me to understand !selection map, or !selection map doesn't work
in help for that command there is written:

Remaps some action block IDs
Usage: !selection map [#id# [#id# [...]]] args [#argNo# [#argNo# [...]]] from <#min# - #max#/#from#> to #to#
i did came up, that [...] is optional, so after few tries i used map succesably
!selection map args from 33 to 45 - used on some switches and doors works, but doesn't remap anything
so i tried to put switch blocks ID's (184 and 113)
!selection map 113 185 args from 33 to 45 doesn't remap anything

idk what does #argNo# means, how succesively remap switch ID's and how to remap target/ID of portal

its not working command? or just my failture?

LukeM · 2019-07-06 20:32:46

Oh, I never did write out the full documentation, argNo is the index of the argument you want to change, in this case there is only one, so you'll just put 0, but if it were a portal or something then you could select whether you wanted to map the rotation, source, or destination.

Trytu

Trytu · 2019-07-06 21:12:56

LukeM wrote:

Oh, I never did write out the full documentation, argNo is the index of the argument you want to change, in this case there is only one, so you'll just put 0, but if it were a portal or something then you could select whether you wanted to map the rotation, source, or destination.

after inputing 0 in the args, i was able to successfully remap my switches
the sollution was !selection map 184 113 args 0 (or args 0 0) from 33-45 to 45, otherwise it didn't work
i thought that [..] - mean that it's optional, have default of all the ID's and arguments, and it not necessary to work
in !selection tiles, smart mode is optional, why doesn't !selection map has defaults
i understand that you haven't time, still don't know how other players came up how this command works
thanks for fast answer

LukeM · 2019-07-06 23:46:14

Trytu wrote:

LukeM wrote:
Oh, I never did write out the full documentation, argNo is the index of the argument you want to change, in this case there is only one, so you'll just put 0, but if it were a portal or something then you could select whether you wanted to map the rotation, source, or destination.
after inputing 0 in the args, i was able to successfully remap my switches
the sollution was !selection map 184 113 args 0 (or args 0 0) from 33-45 to 45, otherwise it didn't work
i thought that [..] - mean that it's optional, have default of all the ID's and arguments, and it not necessary to work
in !selection tiles, smart mode is optional, why doesn't !selection map has defaults
i understand that you haven't time, still don't know how other players came up how this command works
thanks for fast answer

To be honest, I hadn't noticed that there was a [] around the first ID, you're probably right that there shouldn't be.

If you're interested, the reason it's there isn't a conscious choice, its just an artefact of how my command system works. I wanted it to be easy to create new plugins that feel the same as the rest of the commands, so the help commands are automatically generated so that they all use the exact same format.

I basically specify the structure of the command and it uses this to automatically parse the parameters from a message, as well as automatically generate the usage message. In this case I give it the format "~ids#id#n args ~argNos#argNo#n from <#min#n - #max#n/#from#n> to #to#n", which just specifies that argNos should be a list, and for all lists it automatically generates the usage message [#argNo# [#argNo# [...]]], as it will technically work even though it won't do anything meaningful.

I guess the way to fix this would be to add a type of list that must contain at least one copy, I probably won't have time to do this in the near future, but I'll probably be rewriting this for EEU at some point, so I'll make sure to add something like this then

peace · 2019-07-07 10:07:02

never use mappign its a quite hard command and i even sometimes mess up with tile bntu oi get how tile works (smart being able to tile IDs of portals via a formula it memorized form the first 2 clones)

also sometimes an structturei copy does nto fit in the world (mostly cause of tiling) its becuasethe last clone doesnt fit in by 1 pixel line i wish there was a way to fit it in and lsoe that line form the structure (optinal ofc) and or atleast say why it doesnt fit (because there is 1 lien fo blocks that doeoesnt fit fomr the last stucture) (or 20 structtures and X lines fomr a stricutre doesnt fit ( sometimes you just dotn knwo how many cloens fits in a lien and aretoo lazy to coutn out (or is too mcuhwork) and just guess hwo many tiles u can make if too mcuhyou dotn know if its TOOO much or just a little too much))

EDIT: nnice work if ur reamkgin this in EEU i love to use your bot but i woudl love to see CB first XD lukem an dbtw how were tour exams?

Official Everybody Edits Forums

#51 2018-11-20 08:22:43

Re: [Beta] Plug-It

#52 2018-11-20 14:29:03

Re: [Beta] Plug-It

#53 2018-11-20 15:47:56

Re: [Beta] Plug-It

#54 2018-11-20 16:27:15

Re: [Beta] Plug-It

#55 2018-11-20 16:55:10, last edited by LukeM (2018-11-20 16:56:05)

Re: [Beta] Plug-It

#56 2018-11-20 16:57:10, last edited by KirbyKareem (2018-11-20 17:02:15)

Re: [Beta] Plug-It

#57 2018-11-20 22:25:04, last edited by LukeM (2018-11-21 01:50:26)

Re: [Beta] Plug-It

#58 2019-03-01 23:43:17

Re: [Beta] Plug-It

#59 2019-03-02 11:31:50

Re: [Beta] Plug-It

#60 2019-03-02 12:55:07

Re: [Beta] Plug-It

#61 2019-03-02 20:10:38, last edited by peace (2019-03-02 20:12:06)

Re: [Beta] Plug-It

#62 2019-03-12 16:21:10

Re: [Beta] Plug-It

#63 2019-05-04 04:06:21

Re: [Beta] Plug-It

#64 2019-05-04 08:17:38

Re: [Beta] Plug-It

#65 2019-05-04 12:09:11, last edited by LukeM (2019-05-04 12:42:25)

Re: [Beta] Plug-It

#66 2019-06-29 10:16:18

Re: [Beta] Plug-It

#67 2019-06-29 10:37:41

Re: [Beta] Plug-It

#68 2019-06-30 21:16:33

Re: [Beta] Plug-It

#69 2019-07-06 16:47:22

Re: [Beta] Plug-It

#70 2019-07-06 20:32:46

Re: [Beta] Plug-It

#71 2019-07-06 21:12:56

Re: [Beta] Plug-It

#72 2019-07-06 23:46:14

Re: [Beta] Plug-It

#73 2019-07-07 10:07:02, last edited by peace (2019-07-07 10:08:02)

Re: [Beta] Plug-It

Board footer