Do you think I could just leave this part blank and it'd be okay? We're just going to replace the whole thing with a header image anyway, right?
You are not logged in.
i cant play EE. it says movie not loaded when i right click on the game.
read http://eeforumify.com/viewtopic.php?id=14223 and then
http://eeforumify.com/viewtopic.php?id=14601 help me!
So we're just ignoring my problem now?
So we're just ignoring my problem now?
What version of Windows are you running?
Chewy, I'll try.
Gamer1011, it has nothing to do with that at all.
Look at my name, and say that again, please.
i cant play EE. it says movie not loaded when i right click on the game.
read http://eeforumify.com/viewtopic.php?id=14223 and then
http://eeforumify.com/viewtopic.php?id=14601 help me!
Reinstall flash player.
Last edited by Gamer1120 (Sep 17 2011 2:55:24 pm)
Offline
When I sit in EE's lobby for about 5 minutes WITHOUT TOUCHING COMPUTER, the fps of an idle game I play drops to 1. Normaly its 40. And the entire COMPUTER went reallyreallyreallyreally[insert 1000000 reallys here] slow. Explanation?
When I sit in EE's lobby for about 5 minutes WITHOUT TOUCHING COMPUTER, the fps of an idle game I play drops to 1. Normaly its 40. And the entire COMPUTER went reallyreallyreallyreally[insert 1000000 reallys here] slow. Explanation?
Then your computer must have some sort of power-saving thing that activates after 5 minutes. No idea what.
Offline
Idk, when I leave my computer alone WHEN EE IS MINIMIZED, it doesnt lag.
This is a literal EE-drama. I have no clue. You're on your own.
Offline
Um...
What do I do when I see this?
...please help.
-Sarca
Also, I'll put that on my signature for now, so people can help me get rid of those.
Last edited by sarcasticphoenix (Sep 25 2011 3:01:51 pm)
NTtbaMM, but first, MAKE YOUR SIG SMALLER. 2nd, stop trolling us. Even I can do that.
This is a literal EE-drama. I have no clue. You're on your own.
LITERAL EE-drama? Whats that?
Last edited by calculusguy (Sep 25 2011 3:07:10 pm)
NTtbaMM, but first, MAKE YOUR SIG SMALLER. 2nd, stop trolling us. Even I can do that.
1. My signature is small enough
2. My friend made it so that stuff starts up whenever i boot my computer.
I guess you cant read. Sig limit is 300 px, nTtbaMM.
D:
imma change it right now
EDIT:
done.
Last edited by sarcasticphoenix (Sep 25 2011 3:12:11 pm)
It says 306x300, is the first part height? It looks taller than wider to me.
What did you think the limit was? 10000000000000 pixels?
Last edited by calculusguy (Sep 25 2011 3:28:48 pm)
Why don't image uploading programs work for me on google chrome? They work on IE. Sorry if it's vague...
Um...
What do I do when I see this?
http://img35.imageshack.us/img35/34/captureqxm.jpg
...please help.
-SarcaAlso, I'll put that on my signature for now, so people can help me get rid of those.
Stop trying to kidding me. Exactly that is what you got to do.
Why don't image uploading programs work for me on google chrome? They work on IE. Sorry if it's vague...
No idea. Use SRWare Iron (basically the same), or Firefox if you don't want to use IE.
Last edited by Gamer1120 (Sep 30 2011 11:20:20 am)
Offline
Hey Gamer (hope you don't mind me bumping this topic), how do I change the sensitivity of my touchpad?
My hand will just barely touch it while I'm typing and move the cursor somewhere random, messing up whatever I was typing. Starting to get really annoying, it's happened 3 times while I was typing this.
Yeah, well, you know that's just like, uh, your opinion, man.
Offline
Maybe you can help me. :/ My parents don't want to go to a place to get it looked at for money and stuff.
I have a Windows Vista Home Premium 32Bit, Dell, XPS M1330 Series, BIOS Revision A02, Intel laptop. When I try to start it, it gets stuck on the loading bar thing. It just replays it over and over. I cannot get to the Start Windows normally/Run with Safe Mode/etc. screen anymore.
I try running from the CD/DVD Drive at startup, and when I try and re-install the operating system with the disc I have, it loads the files then does the thing with the bar and goes across, then the screen goes black and I have to restart it.
When I run Diagnostics I get error code 2000-0146
If you help me I will give you as many + reps as I have given Echo, right around 40.
Last edited by xputnameherex (Nov 19 2011 8:23:15 pm)
Hey Gamer (hope you don't mind me bumping this topic), how do I change the sensitivity of my touchpad?
My hand will just barely touch it while I'm typing and move the cursor somewhere random, messing up whatever I was typing. Starting to get really annoying, it's happened 3 times while I was typing this.
Assuming you're on Win7:
Start > Control Panel > (Hardware and Sound) > Mouse
Play around with the "Double Click Speed" under the "Buttons" tab and "Select a pointer speed" under the "Pointer Options".
Depending on the laptop and software that came with it there might be more options, but the above mentioned ones are always there. Unfortunately they don't directly change "sensitivity". Look in all the tabs in the mouse section, and in the Control Panel there might be a separate page for the touchpad too, so look for that.
Maybe you can help me. :/ My parents don't want to go to a place to get it looked at for money and stuff.
I have a Windows Vista Home Premium 32Bit, Dell, XPS M1330 Series, BIOS Revision A02, Intel laptop. When I try to start it, it gets stuck on the loading bar thing. It just replays it over and over. I cannot get to the Start Windows normally/Run with Safe Mode/etc. screen anymore.
I try running from the CD/DVD Drive at startup, and when I try and re-install the operating system with the disc I have, it loads the files then does the thing with the bar and goes across, then the screen goes black and I have to restart it.
When I run Diagnostics I get error code 2000-0146
If you help me I will give you as many + reps as I have given Echo, right around 40.
I'm afraid it sounds like your hard drive is dying / has died, as when you try to access it your laptop stops, or at least a miscommunication between your hard disk and motherboard.
You should look into having it replaced (sorry parents!).
As a last resort you could try this:
As soon as you turn on your laptop, keep hitting F2 to get into the BIOS menu. Because all BIOSes look different I can't say where it will be located, but look for hard drive settings and change AHCI Sata to SATA, or the other way around, and try again. If this doesn't work, change it back and have it fixed.
Even if it does work, it's probably just a temporal fix and you should still look into having it replaced because this is clearly a hardware error.
No u.
Offline
It happened before (it used to be my brother's) and he was able to simply re-install the operating system, but I will try that Sata thing.
My computer doesn't have the Dell Touchpad menu (for some reason), so I'm downloading it now. It's not meant for my computer, but whatever.
Last edited by Tako (Nov 20 2011 9:31:58 pm)
Yeah, well, you know that's just like, uh, your opinion, man.
Offline
Maybe you can help me. :/ My parents don't want to go to a place to get it looked at for money and stuff.
I have a Windows Vista Home Premium 32Bit, Dell, XPS M1330 Series, BIOS Revision A02, Intel laptop. When I try to start it, it gets stuck on the loading bar thing. It just replays it over and over. I cannot get to the Start Windows normally/Run with Safe Mode/etc. screen anymore.
I try running from the CD/DVD Drive at startup, and when I try and re-install the operating system with the disc I have, it loads the files then does the thing with the bar and goes across, then the screen goes black and I have to restart it.
When I run Diagnostics I get error code 2000-0146
If you help me I will give you as many + reps as I have given Echo, right around 40.
According to this it has to be something with the hard drive. It isn't really that expensive to replace it, and not hard to. Buy a new hard drive, open your laptop and replace the old one.
Oops, didn't see Nou's post. Thanks for taking over this topic
My computer doesn't have the Dell Touchpad menu (for some reason), so I'm downloading it now. It's not meant for my computer, but whatever.
Is it fixed now?
Last edited by Gamer1120 (Jan 11 2012 1:14:48 pm)
Offline
Hello, oh great and powerful krazyman. I have some questions here.
Would you mind answering some of them? More in the second post I made, but if you can help with the first post that'd be great.
I hate tall signatures.
Offline
It's like everything on the forum is secret text.
*HUGEST COUGH IN THE WORLD*
Alright, my computer is a bit old.... maybe 10 years? I don't exactly know. All I know is I don't have the service pack CDs for it. There's the problem.
Now, I wanted to install the 'East Asian' languages onto my computer but apparently I'm missing xjis.nls and c:\i386 (Which, obviously, are necessary for this procedure). I can't find anywhere online that has a legit download of these two things. I don't even know which one I should be downloading. I just remember the c_10001.nls was the first thing I searched for before the xjis and i386.
*HUGEST COUGH CLOSER IN THE WORLD*
[ Started around 1738709754.2757 - Generated in 0.115 seconds, 14 queries executed - Memory usage: 1.76 MiB (Peak: 2.01 MiB) ]