Do you think I could just leave this part blank and it'd be okay? We're just going to replace the whole thing with a header image anyway, right?
You are not logged in.
The Ideal Rankine Cycle
Our Slogan: Constant pressure approach is more realistic than heat transfer at constant boundary temperature
Who we are
We are a simple thermodynamic cycle that operates on the following four processes:
1 - 2 : Reversible adiabatic pumping process in the pump
2 - 3 : Constant-pressure transfer of heat in the boiler
3 - 4 : Reversible adiabatic expansion in the turbine
4 - 1 : Constant-pressure transfer of heat in the condenser
Our Purpose
EEfficiency is our utmost priority
EEfficient
Pronunciation: /ɪɪˈfɪʃ(ə)nt/
(Of Everybody Edits) achieving maximum productivity with minimum wasted effort or expenseOur purpose is to implement a reheat and regenerative approaches to decrease the rate of exergy destruction inside the system. Our ultimate goal is to take advantage of whatever left availability of working fluid that would be condensed and using it Brayton cycle. We are ready to do whatever it takes to increase the EEfficiency.
A working fluid is a happy fluid
It is readily evident that the Rankine cycle has lower efficiency than a Carnot cycle with the same maximum and minimum temperatures. Then why not select the Carnot cycle process? Experimental data and years of experience suggest that great difficulties occur during pumping process for taking a fluid with quality and reducing its quality to saturated liquid state while increasing the pressure. Make your fluid happy, use Rankine cycle. We are here humbly at your service.
Feedwater heaters are a must
Extracting a portion of flow from the reversible adiabatic expansion process, and using it to reheat the already available working fluid that had expanded from the turbine poses utmost importance. We all have to make sacrifices, and have to use as many feedwater heaters, open or closed, as possible. We must stand united during this whole process, we will stand up against whoever that tries to break our bonds, we shall stay strong.
High quality saturated mix causes no significant harm to turbine blades
With the help of a reheat cycle, we can avoid the area under the saturated dome, increasing the lifetime of the device used at reversible adiabatic expansion. We are aware of the predator that awaits us, and we will not be prey amongst its fangs. We are ready to take whatever precaution we must to ensure safety of the society.
System is designed on same shaft
Pump and turbine will be designed to use the same shaft for the power input and output, thus requiring no additional input after the startup. Likewise we will stick the community together, with one purpose and propose an environment for them to help each other develop themselves.
Steady state steady flow process
The system undergoes an SSSF process, which is never designed to stop, but only to move forward. We will not give up in neither abundance nor drought. The only way for us is forward.
A word on Issues
We don't think the predetermined issues really reflect the troubles of our people. We are asking the real questions here, like what is your EEficiency? What is the heat distribution of flow around the turbine blades? Is the pipe friction significant? When will fatigue occur on the main shaft that transmits the useful power? Are the cold air standards applicable for an internal device? And much more.
Ladies and gentlemen, I leave you with your conscience.
Offline
Offline
Offline
Yes that is the plan.
aka towwl
Offline
Where is that stawpool link?
Warning!
This user has been found guilty by The Committee of Truth of using honesty, and reminding people of the past, without permission and outside of the allotted timeframes.
I’ve been asked if I’m ChatGPT5.
The answer is no.
I hope this helps! Let me know if you have any other questions.
Everybody edits, but some edit more than others
Offline
Where is that stawpool link?
The unofficial Straw Poll can be found here.
Offline
Thanks for hearing Allah's voice, you shall be rewarded by his dignity. Oh lord.
Offline
As a tuba player,
You have all my support gkaby !
Thanks for hearing Allah's voice, you shall be rewarded by his dignity. Oh lord.
Please stop with your weak propaganda and misleading statistics.
:.|:;
Offline
Zumza wrote:Where is that stawpool link?
The unofficial Straw Poll can be found here.
It's pretty much worthless now that it's tampered with.
10/10 kira
Discord: jawp#5123
Offline
General Abraham Lincat Whiskers, On Personal Attacks
Aside from my errant attack on Jawapa, which I'll admit was quite unbecoming of myself, I do not believe in the engagement of personal attacks as a campaign. I'm sure we have all made our fair share of mistakes in the past, and so let us not base this campaign on who we were, but who we want to be.
That being said, I will not tell you who to vote for, but will encourage all outside users to vote. Vote, for it is your duty. And when do you vote, to vote based on the issues. If you support the Benjaminsons, then power to you, if you support an Indeependent party, then good for you too, but please beware of why you are supporting these parties, and not just vote based on personal attacks.
Avatar by RainDiance
I am obsessed with Steven Universe
Offline
and so let us not base this campaign on who we were, but who we want to be.
Fair enough; but the people want to know who you are right now. And who you were is the closest thing to that.
*** ANNOUNCEMENT ***
I recently spoke with my campaign adviser, rhazhbash, and we have decided to shift my campaigns in a different direction. I recently moved to a town named "Mafia", and will be campaigning there for the next few days.
Discord: jawp#5123
Offline
Offline
THIS IS AN OFFICIAL MESSAGE
After a lot of discussion, we have finally decided who our vice president will be: Ben!
Ben has shown a lot of enthusiasm towards our party and has improved our flag and he has created an emblem for us. Everyone greet him!
Offline
Discord: jawp#5123
Offline
Nor this one is good. Its hard for average user to order 20 participants.
Keep it simple
Warning!
This user has been found guilty by The Committee of Truth of using honesty, and reminding people of the past, without permission and outside of the allotted timeframes.
I’ve been asked if I’m ChatGPT5.
The answer is no.
I hope this helps! Let me know if you have any other questions.
Everybody edits, but some edit more than others
Offline
Zumza wrote:Nor this one is good. Its hard for average user to order 20 participants.
Keep it simpleThere is really no other way.
What if the user just picked their top three choices? I mean that is how the voting will work in the EElections.
Offline
Zumza wrote:Keep it simple
There is really no other way.
Warning!
This user has been found guilty by The Committee of Truth of using honesty, and reminding people of the past, without permission and outside of the allotted timeframes.
I’ve been asked if I’m ChatGPT5.
The answer is no.
I hope this helps! Let me know if you have any other questions.
Everybody edits, but some edit more than others
Offline
I will be the Benjaminsons. Thanks
Please introduce yourself a bit, at least. You don't need to go all out like a lot of the other candidates; just write enough to get somebody to know you as a candidate for the not-presidency of everybody edits.
aka towwl
Offline
What if the user just picked their top three choices? I mean that is how the voting will work in the EElections.
well then they clearly have trouble following directions.
Speak to onjit for more info on why the previous voting system was such a **** can of an idea.
Discord: jawp#5123
Offline
[ Started around 1748229086.3674 - Generated in 0.581 seconds, 12 queries executed - Memory usage: 1.9 MiB (Peak: 2.21 MiB) ]