Official Everybody Edits Forums

Do you think I could just leave this part blank and it'd be okay? We're just going to replace the whole thing with a header image anyway, right?

You are not logged in.

#26 Before February 2015

Jojatekok
Guest

Re: Building Challenge

#3
scontraption.png
Upper portal
       ID: 0
       Destination: 0
Bottom portal
       ID: 1
       Destination: 0

#27 Before February 2015

Jasonma
Guest

Re: Building Challenge

Nice! very good job jojatekok. a +rep for you since that is just... :O!

so that's a 12x3 with 3 blocks used.
and yes steve... good idea for a challenge but... is it possible? :/ landing centered on a dot with no blocks around it... are dots or arrows allowed around the finish dot?

#28 Before February 2015

stevethepirahnaplant
Guest

Re: Building Challenge

^yes

#29 Before February 2015

Jasonma
Guest

Re: Building Challenge

ok then that's probably possible. i'll get right to it //forums.everybodyedits.com/img/smilies/wink

#30 Before February 2015

calculusguy
Guest

Re: Building Challenge

I have one. A pixel sorter! It puts the smiley in a hole 1-16 depending on what pixel its on.
G=Gate
Hit a key, go on the two gates, and it puts you in the corresponding hole.

    //forums.everybodyedits.com/img/smilies/smile
  GG

#31 Before February 2015

Jasonma
Guest

Re: Building Challenge

me r going... ? lol...

so since there are 16 pixels... you're saying each of those 16 will get you do a different place?

#32 Before February 2015

calculusguy
Guest

Re: Building Challenge

yes. I think its hard so 50*50?

#33 Before February 2015

Jasonma
Guest

Re: Building Challenge

yeah y not... 25x25 may do it but... yeah give the builders some space. good idea +rep

whew i dunno if i wanna do this one... i'll leave it to someone who is smarter //forums.everybodyedits.com/img/smilies/tongue

Last edited by Jasonma (Jun 26 2011 5:12:40 pm)

#34 Before February 2015

Aoitenshi
Member
Joined: 2015-02-18
Posts: 2,058

Re: Building Challenge

You have failed your challenge! //forums.everybodyedits.com/img/smilies/big_smile

http://everybodyedits.com/games/PWABAvimSna0I

This is the ramp SmileyFace, My friend made //forums.everybodyedits.com/img/smilies/big_smile

Jojatekok wrote:

#3
http://img232.imageshack.us/img232/5803 … aption.png
Upper portal
       ID: 0
       Destination: 0
Bottom portal
       ID: 1
       Destination: 0

Everyone did not notice it must go over 25 blocks D:

Last edited by Aoitenshi (Jun 26 2011 8:05:25 pm)

Offline

#35 Before February 2015

Chimi
Guest

Re: Building Challenge

For #1, when the smileys are reset, they will always be in exactly the same position, making it impossible to separate them without touching a keyboard.

#36 Before February 2015

Jasonma
Guest

Re: Building Challenge

uhh... they don't have to be reset. i mean just when they are less than a block apart, i wish there was a way they could be separated automatically. it would be a great help in a lot of my levels.

and aoitenshi... the challenges are actually meant for everyone. and yes jojatekok did a very nice job. but you can't launch something 25 blocks into the air... maximum is 19 with my comtraption. it's simply the terminal velocity.

Last edited by Jasonma (Jun 26 2011 8:30:46 pm)

#37 Before February 2015

Aoitenshi
Member
Joined: 2015-02-18
Posts: 2,058

Re: Building Challenge

Oh I see.

Challenge #3 & #5 Complete!

Challenge #3 = Ramp reaches 37 Blocks. By Smiley_Face.
Challenge #5 = By inserting guest in the key AFK, it will operate. (Credits to Takoman02 for The Key AFK thingy)

http://everybodyedits.com/games/PWABAvimSna0I

^Linky!

2SxU

Last edited by Aoitenshi (Jun 26 2011 9:21:27 pm)

Offline

#38 Before February 2015

supadorf24
Member
Joined: 2015-02-26
Posts: 2,675

Re: Building Challenge

Credit goes to Takoman for the random machine, Aoitenshi. Link.

Offline

#39 Before February 2015

Aoitenshi
Member
Joined: 2015-02-18
Posts: 2,058

Re: Building Challenge

Supadorf24 wrote:

Credit goes to Takoman for the random machine, Aoitenshi. Link.

Forgot to include credit *Slaps Face*

Offline

#40 Before February 2015

Jasonma
Guest

Re: Building Challenge

aoitenshi, challenge 5 wasn't completed. you didn't get it. point is, your smiley starts out on 3 blocks. each of those blocks is 16 pixels wide right? and your smiley is also 16 pixels wide right? so lets say your smiley covered this part. that means that it would send it to one of the sixteen chutes depicted in the challenge picture. you'd have to cover each of the 16 possibilities probably with some complex arrow system and deliver each possibility with a chute. if you still don't get it, i'll have to provide you with some close up pictures.
                          ----------------
|----------------|----------------|----------------|

#41 Before February 2015

Jojatekok
Guest

Re: Building Challenge

#4
scontraption.png
12x12 blocks | 20 blocks used in contraption

#42 Before February 2015

calculusguy
Guest

Re: Building Challenge

No... There are 2 blocks. If a smiley is 5 px. on 1st it is 11 px. on 2nd, send it to chute 11.
If it is 7 px. on first it is 9 px. on second, send it to chute 9.

Also make it so it will work if they start from a standstill and the key is activated remotely.

Last edited by calculusguy (Jun 27 2011 6:14:47 am)

#43 Before February 2015

Jasonma
Guest

Re: Building Challenge

oh i see... oops //forums.everybodyedits.com/img/smilies/big_smile

so it's like

                      ----------------
|----------------|----------------|

ok

and jojatekok, that doesn't make you land in the middle of the dot. it does horizontally, but not vertically. and u must have a frame around it so this one would have been 14x14

Last edited by Jasonma (Jun 27 2011 8:50:02 am)

#44 Before February 2015

Processor
Member
Joined: 2015-02-15
Posts: 2,246

Re: Building Challenge

Ok, i got 2 ideas for #1!
But none of them work now! But they will work after a few updates!

First idea:
2011-06-27_1619.png

At the moment the portals don't send you to a random one when two portals have the same id. When that bug is fixed this will work...

Left Portal:
       ID: 1
       Destination: 0

Middle Portal:
       ID: 0
       Destination: 2

Right Portal:
       ID: 0
       Destination: 2
EDIT: You can enter the both sides if you try reentering the world, but it wont change every time you enter the portal, only then you reenter the world. if you make about 50 portals of the same id, there is a very small chance to have both players dropped in the same hole, still, you cant be sure...

Second idea:
2011-06-27_1629.png

That door between both exits is a crown door, and because only 1 person can have a crown only one of them goes in the bottom exit and the other one in the upper one...

Last edited by Processor (Jun 27 2011 9:15:19 am)


I have never thought of programming for reputation and honor. What I have in my heart must come out. That is the reason why I code.

Offline

#45 Before February 2015

Jasonma
Guest

Re: Building Challenge

yeah... i tried the portal one too :/ ok i'll leave the challenge there and hope the update comes. and DANG #4 is hard... i'm trying to center it vertically...

EDIT:

got it!

#4
challenge4completions.png

for the purposes of having a frame (which every contraption has to have even though the player doesn't touch it, i built one strictly next to the last part of the path my smiley took. don't worry... i tested it without the frame and it will take the same path.

if you would like to see it, i now have encased it in a secret path frame which is the disappearing kind.
http://everybodyedits.com/games/PWAFjwc4iba0I

Last edited by Jasonma (Jun 27 2011 9:20:13 am)

#46 Before February 2015

Chimi
Guest

Re: Building Challenge

4:
h6ikh.png

11x6

14 blocks (not including the spawn point) / 15 blocks (including the spawn point)

#47 Before February 2015

Jasonma
Guest

Re: Building Challenge

nice.

so some modifiers...
your contraption is actually 13x8 (to be fair to the other ones) making it #1 if it worked... but it doesnt... and its 15 blocks since spawn point counts //forums.everybodyedits.com/img/smilies/smile sorry.

i used microsoft paint to zoom in down to the   pixel. yours doesnt require support of the frame but... its not pixel perfect. sorry //forums.everybodyedits.com/img/smilies/smile

but hey. nice try //forums.everybodyedits.com/img/smilies/smile i encourage you to try again to beat mine //forums.everybodyedits.com/img/smilies/wink (it's not fun being the only person besides jojatekok who beats these challenges //forums.everybodyedits.com/img/smilies/neutral)

Last edited by Jasonma (Jun 27 2011 10:05:14 am)

#48 Before February 2015

Processor
Member
Joined: 2015-02-15
Posts: 2,246

Re: Building Challenge

Oh i got a better idea!
2011-06-27_1934.png

And a level to play it: Edit: level deleted... //forums.everybodyedits.com/img/smilies/smile

Last edited by Processor (Jun 27 2011 1:25:34 pm)


I have never thought of programming for reputation and honor. What I have in my heart must come out. That is the reason why I code.

Offline

#49 Before February 2015

Jasonma
Guest

Re: Building Challenge

LMAO! //forums.everybodyedits.com/img/smilies/big_smile +rep cause that was just right in front of all our noses...

ok well i made it smaller with less blocks.
challenge4completion.png

Last edited by Jasonma (Jun 27 2011 12:10:02 pm)

#50 Before February 2015

Muffin
Guest

Re: Building Challenge

#4 - 12x3 PWNT

R6fe4.png

Jasonma 142391389247540

Board footer

Powered by FluxBB

[ Started around 1731792391.5328 - Generated in 0.066 seconds, 12 queries executed - Memory usage: 1.71 MiB (Peak: 1.96 MiB) ]